Smeal Water Well Pump Hoists
Product Details

     < Back to Products
4T Pump Hoist
    
Available Options
Sandline Winch 3T 4T 5T
Wire Winder
Tailgate - Bumper
Oil Cooler
Power to Rear
Pipe Racks
Walking Beam - Frame Mounted
Walking Beam - Mast Mounted
Cathead
Plastic Pipe Reel
Front Hydraulic Outrigger
E-3 Mast Extension
Breakout Wrench Cylinder
Paint Special Color
Mast Light
Toolbox
Product Description:

The 4T is designed for fast line speed while maintaining 3 ton capacity.  Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  The 4T is designed to mount on 3/4 ton or larger truck.  Weight is approximately 2,200 lbs.

 

Standard features: 

  • Mast: 35 ft. high telescoping mast with 10 ft. maximum layback
  • Capacity: 2,000 lbs. single line, 6,000 lbs. with 3 part line
  • Mainline speed: 150 feet per minute
  • Mainline cable: 3/8" X 150' with open swedge socket
  • The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor.  Braking is accomplished with a Smeal automatic fail safe brake.
  • Line Block: Block for reeving a 2 part or 3 part line
  • Hook: 3 ton safety hook
  • PTO for standard transmission with direct mounted pump (PTO is available for an automatic transmission at additional cost)
  • Hydraulic pump: Gear pump
  • The pump hoist may be mounted in a 48" x 9' utility body or on a deck
  • Open frame design allows for full use of the deck area 
  • Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level 
  • Hydraulic bypass valves are incorporated to protect from overloading
  • Rear hydraulic outriggers with holding valves
  • Holding valve on mast cylinders
  • White paint

 Optional features: 

  • Sandline winch: 1,000 lb. bare spool lifting capacity with 325 feet per minute line speed.  It is power-up and power-down and also incorporates a heavy duty clutch for free-fall.  Braking is accomplished with a Smeal automatic fail safe brake.  Spool capacity: 1,650 ft. of 1/4" cable, 1,050 ft. of 5/16" cable or 740 ft. of 3/8" cable.
  • Electronic speed control
  • Pipe racks
  • Oil cooler
  • Cathead
  • Breakout wrench hydraulic cylinder
  • Front hydraulic outrigger jack
  • E-3 mast extension
  • Extended mast height
  • Corded remote control
  • Wireless remote control
  • Tailgate
  • Rear bumper
  • Receiver hitch
  • Toolboxes
  • Mast lights
  • Walking beam
  • Special paint colors
  • Line-X spray-on bed liner
  • Utility body
  • Deck
  • Headache rack
  • Wire winder
  • Plastic pipe reel
  • Power to the rear
  • All other options are available on request

 

  © 2010 Smeal Derricks Site by: WCES