Smeal Water Well Pump Hoists
Product Details

     < Back to Products
5T Pump Hoist
    
Available Options
Sandline Winch 3T 4T 5T
Wire Winder
Tailgate - Bumper
Oil Cooler
Power to Rear
Pipe Racks
Walking Beam - Frame Mounted
Walking Beam - Mast Mounted
Cathead
Plastic Pipe Reel
Front Hydraulic Outrigger
E-3 Mast Extension
Breakout Wrench Cylinder
Paint Special Color
Mast Light
Toolbox
Product Description:

The 12,000 lb. capacity 5T is the most popular pump hoist.  It is extremely versatile with capabilities ranging from small submersible pumps all the way up to line shaft turbines.  Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  The 5T is designed to mount on 1 ton or larger truck.  Weight is approximately 2,400 lbs.

Standard features:

  • Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
  • Capacity: 3,000 lbs. single line, 12,000 lbs. with 4 part line
  • Mainline speed: 120 feet per minute
  • Mainline cable: 7/16" X 220' with open spelter socket
  • The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor.  Braking is accomplished with a Smeal automatic fail safe brake.
  • Line Block: Blocks for reeving a 2 part, 3 part or 4 part line
  • Hook: 5 ton safety hook
  • PTO for standard transmission with direct mounted pump (PTO is available for an automatic transmission at additional cost)
  • Hydraulic pump: Gear pump
  • The pump hoist may be mounted in a 48" x 9' utility body or on a deck 
  • Open frame design allows for full use of the deck area 
  • Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level 
  • Hydraulic bypass valves are incorporated to protect from overloading
  • Rear hydraulic outriggers with holding valves
  • Holding valve on mast cylinders
  • White paint

Optional features:

  • Sandline winch: 1,000 lb. bare spool lifting capacity with 325 feet per minute line speed.  It is power-up and power-down and also incorporates a heavy duty clutch for free-fall.  Braking is accomplished with a Smeal automatic fail safe brake.  Spool capacity: 1,650 ft. of 1/4" cable, 1,050 ft. of 5/16" cable or 740 ft. of 3/8" cable.
  • Electronic speed control
  • Pipe racks
  • Oil cooler
  • Cathead
  • Breakout wrench hydraulic cylinder
  • Front hydraulic outrigger jack
  • E-3 mast extension
  • Extended mast height
  • Corded remote control
  • Wireless remote control
  • Tailgate
  • Rear bumper
  • Receiver hitch
  • Toolboxes
  • Mast lights
  • Walking beam
  • Special paint colors
  • Line-X spray-on bed liner
  • Utility body
  • Deck
  • Headache rack
  • Wire winder
  • Plastic pipe reel
  • Power to the rear
  • All other options are available on request

 

  © 2010 Smeal Derricks Site by: WCES