Smeal Water Well Pump Hoists
Product Details

     < Back to Products
10T Pump Hoist
    
Available Options
Sandline Winch 10T
Wire Winder
Oil Cooler
Cathead
Breakout Wrench Cylinder
Paint Special Color
Mast Light
Toolbox
Product Description:

The 10T pump hoist with 27,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck.  Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps.  Total pump hoist weight is approximately 7,000 lbs.  A deck, headache rack and toolboxes add approximately 3,000 lbs.

 

Standard features: 

  • Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
  • Capacity: 9,000 lbs. single line, 27,000 lbs. with 3 part line
  • Mainline speed: 140 feet per minute
  • Mainline cable: 5/8" X 150'
  • The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor.  Braking is accomplished with a Smeal automatic fail safe brake.  The winch drum has a cable storage section with enough drum width to spool a 3 part line on a bare drum.
  • The tailout winch has a 2,500 lb. lifting capacity at 150 feet per minute and uses a fail-safe brake.  Tailout cable: 3/8" x 125 ft.
  • Line Block: Blocks for reeving a 2 part or 3 part line
  • Hooks: 7 ton and 15 ton safety hooks
  • PTO for standard transmission (PTO is available for an automatic at additional cost)
  • Hydraulic pump: 2 stage gear pump
  • The pump hoist is designed to mount on a deck
  • Open frame design allows for full use of the deck area 
  • Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level 
  • Hydraulic bypass valves are incorporated to protect from overloading
  • Rear hydraulic outriggers with holding valves
  • Holding valve on mast cylinders
  • White paint

 Optional features: 

  • Sandline winch: 2,500 lb. bare spool lifting capacity with 450 feet per minute line speed.  It is power-up and power-down.  Braking is accomplished with a Smeal automatic fail safe brake.  Spool capacity: 1,900 ft. of 1/2" cable, 2,500 ft. of 7/16" cable or 3,400 ft. of 3/8" cable.
  • Electronic speed control
  • Oil cooler
  • Cathead
  • Breakout wrench hydraulic cylinder
  • Front hydraulic outrigger jacks
  • Extended mast height
  • Corded remote control
  • Wireless remote control
  • Tailgate
  • Toolboxes
  • Mast lights
  • Walking beam
  • Special paint colors
  • Line-X spray-on bed liner
  • Deck
  • Headache rack
  • Wire winder
  • Power to the rear
  • All other options are available on request
  © 2010 Smeal Derricks Site by: WCES