The 12T pump hoist with 33,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck.  Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps.  Total pump hoist weight is approximately 8,700 lbs.  A deck, headache rack and toolboxes add approximately 3,000 lbs.

Standard features:

• Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
• Capacity: 11,000 lbs. single line, 33,000 lbs. with 3 part line
• Mainline speed: 140 feet per minute
• Mainline cable: 5/8" X 150'
• The mainline spool is driven by 2 heavy duty pinion gears with the pinion shafts direct coupled to 2 hydraulic motors.  Braking is accomplished with 2 Smeal automatic fail safe brakes.  The winch drum has a cable storage section with enough drum width to spool a 3 part line on a bare drum.
• The tailout winch has a 2,500 lb. lifting capacity at 150 feet per minute and uses a fail-safe brake.  Tailout cable: 3/8" x 125 ft.
• Line block: Blocks for reeving a 2 part or 3 part line
• Hooks: 7 ton and 15 ton safety hooks
• PTO for standard transmission (PTO is available for an automatic at additional cost)
• Hydraulic pump: 3 stage gear pump
• The pump hoist is designed to mount on a deck
• Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level 
• Hydraulic bypass valves are incorporated to protect from overloading
• Rear hydraulic outriggers with holding valves
• Holding valve on mast cylinders
• White paint

 Optional features: 

• Sandline winch: The sandline winch can be switched between a 5,000 lb. bare spool lifting capacity with maximum speed of 250 feet per minute or 2,500 lb. bare spool capacity with 500 feet per minute line speed.  It is power-up and power-down.  Braking is accomplished with 2 automatic fail safe brakes.  Spool capacity: 1,700 ft. of 1/2" cable, 2,275 ft. of 7/16" cable or 3,000 ft. of 3/8" cable.
• Electronic speed control
• Oil cooler with hydraulic fan motor
• Cathead
• Breakout wrench hydraulic cylinder
• Front hydraulic outrigger jacks
• Extended mast height
• Corded remote control
• Wireless remote control
• Tailgate
• Toolboxes
• Mast lights
• Walking beam
• Special paint colors
• Line-X spray-on bed liner
• Deck
• Headache rack
• Wire winder
• Power to the rear
• All other options are available on request