Product Description:
The R12 pump hoist with 44,000 lbs. capacity and a 44 ft. high telescoping mast is designed for fast and easy setup by means of a self supporting mast with two 4 1/2" bore hydraulic cylinders. A guy cable is not needed in most situations. Designed to allow for easy access to hard-to-get-to pumps.
Standard features:
-
Mast: 44 ft. high telescoping mast with 10 ft. maximum layback
-
Capacity: 11,000 lbs. single line, 44,000 lbs. with 4 part line
-
Mainline speed: 120 feet per minute
-
Mainline cable: 5/8" X 280'
-
The mainline spool is driven by 2 heavy duty pinion gears with the pinion shafts direct coupled to 2 hydraulic motors. Braking is accomplished with 2 Smeal automatic fail safe brakes. Smeal's unique rigging on the main winch allows changing from a 4 part line to a 2 part line with minimal time and effort.
-
The tailout winch has a 2,500 lb. lifting capacity at 100 feet per minute and uses a fail-safe brake. Tailout cable: 3/8"
-
Line block: 2 sheave block with bearings for 4 part line, hook not included
-
PTO for standard transmission
-
Hydraulic pump: 3 stage gear pump
-
The deck is an integral part of the R12 rig. A Smeal deck of 17 ft. minimum length is required.
-
Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level
-
Hydraulic bypass valves are incorporated to protect from overloading
-
Rear hydraulic outriggers with holding valves
-
Holding valve on mast cylinders
-
White paint on the mast and black paint on the deck and rig frame
Optional features:
-
Sandline winch: The sandline winch can be switched between a 5,000 lb. bare spool lifting capacity with maximum speed of 250 feet per minute or 2,500 lb. bare spool capacity with 500 feet per minute line speed. It is power-up and power-down. Braking is accomplished with 2 automatic fail safe brakes. Spool capacity: 1,900 ft. of 1/2" cable, 2,500 ft. of 7/16" cable or 3,400 ft. of 3/8" cable.
-
Extra layback. When equipped for extra layback the mast can be positioned to allow for 20 ft. maximum layback.
-
Electronic speed control
-
Oil cooler with hydraulically driven fan
-
Cathead
-
Breakout wrench hydraulic cylinder
-
Front hydraulic outrigger jacks
-
Extended mast height
-
Corded remote control
-
Tailgate
-
Toolboxes
-
Mast lights
-
Walking beam
-
Special paint colors
-
Line-X spray-on bed liner
-
Deck
-
Towing hitch
-
Headache rack
-
Power to the rear. Maximum 25 GPM @ 2,250 PSI
-
All other options are available on request
For a printable brochure click on "download specs" at the top of this page.
|